Murphy's Designs
Tatting 116

 __________________________

 

 

 

Free-standing machine embroidery tatting 3D roses done in the hoop!  Complete instructions included.

 

For 4x4 inch hoops.

 

All designs are delivered as email attachment in Zip file.

 


Tatting by Murphy's Designs
Click for a larger view.

Picture of my stitchouts.

Completely free-standing tatting designs done in the machine embroidery hoop!

3D roses!  All  designs on this page are completely free standing.  They are done with and without a crystal for the center.  Done with lace or with Mylar for the outside layer of the rose.  The roses can be used for many different projects including a brooch or to decorate your projects.

These are free-standing designs.  I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.

Tatting by Murphy's Designs
Click for a larger view.
Here are the 5 pieces for this set.  The middle section was stitched twice so I could make 2 projects. 

You can mix and match these pieces together.  Use them all or just 1 or 2 pieces.

For 4x4 inch hoops.


Complete instructions included.

VERY EASY

Tatting by Murphy's Designs
Click for a larger view.
I'm holding the brooch that I made with the 3 sections - the Mylar is in the back and shows thru the middle piece.  The middle is the dark purple.  The center is made for a hot fix crystal.  I used a 10 SS for this one.

Tatting instructions included.

VERY EASY

Tatting by Murphy's Designs
Click for a larger view.
Here is the back with the pin that I hot glued in place.  I used a small amount of hot glue in the center to stick all of the pieces together too.
Tatting by Murphy's Designs
Click for a larger view.
Here are the designs with the lace outside piece, the regular middle and the regular center.  I added a brad to the middle and in the hole in my little fun box. 

It was VERY EASY!

Tatting by Murphy's Designs
Click for a larger view.
Here is the back of the brad.

VERY EASY!

Tatting by Murphy's Designs
Click for a larger view.
I'm holding a variation of what you can do.  I used the 2 outer pieces and used a small brad for the center.

I get my Mylar from Heirlooms by Sharon.


I punched the hole in the Mylar for the outside piece with the tip of my letter opener.

Tatting by Murphy's Designs
Click for a larger view.
You could even use the lace piece all by itself.  I added a brad to the middle.  It would do OK but I think it does better with the rest of the pieces joined together.

VERY EASY! 

Tatting by Murphy's Designs
Click for a larger view.
This is not the best picture.  I am holding the middle section with a brad in the middle.  This will do great all on its own.

VERY EASY! 

Tatting by Murphy's Designs
Click for a larger view.
Another type of brad with a crystal.  This seems a bit big to me but you can add whatever you like to them.

VERY EASY! 

Tatting by Murphy's Designs
Click for a larger view.
Another picture of the back of the Mylar piece.  I gently used my letter opener point to punch the hole in the middle thru the Mylar.

Tatting by Murphy's Designs
Click for a larger view.
This is the very tiny center that is used with a crystal.  It has extra stitches in the center for the hot fix glue.

VERY EASY!  and very tiny!

Tatting by Murphy's Designs
Click for a larger view.
Not the best picture but I think you get the idea.  This is the tiny center and I added a mini brad to it.  We got them at JoAnn's and are easy to find.  I think it would be great to put a stud earring thru it rather than the brad.

VERY EASY! 

Tatting by Murphy's Designs
Click for a larger view.
These are the 3 pieces used for the brooch - Mylar outside piece, middle piece and crystal center piece.

VERY EASY! 

BEST DEAL-GET THEM ALL

COMBO 1 - 5 DESIGNS FOR 4x4 INCH HOOP

GET ALL DESIGNS IN SET

 

++++

 

For 4x4 inch (100x100) mm hoops (or larger)

 

ART, JEF, HUS , PES, DST, EXP, SHV, VIP, VP3, XXX

formats and Embird EDR - all included in zip file) 

COMBO 1

PayPal

Regular $9.50

For 4x4 inch (100x100 mm) hoops (or larger)

(5designs)

Sent as email attachment.

To order by check/MO (US funds) - click here.

Click here.


Here's what you get.

 

3D TATTED ROSE

FOR 4X4 INCH HOOPS

Tat116Center

10.6x11.6 mm (0.42x0.46 ")

422 stitches

1 colors, 1 thread changes

Tat116CenterCr

10.6x11.6 mm (0.42x0.46 ")

433 stitches

1 colors, 1 thread changes

Tat116Middle

28.8x30.4 mm (1.13x1.20 ")

3703 stitches

1 colors, 1 thread changes

Tat116OutterLace

45.0x43.1 mm (1.77x1.70 ")

4027 stitches

1 colors, 1 thread changes

Tat116OutterMylar

45.0x43.1 mm (1.77x1.70 ")

3460 stitches

2 colors, 2 thread changes

 


Designs adapted from an original pattern by A. Cordet.

Web page created August 5, 2012 and Updated October 9, 2012

Want to try a small sample of my tatting designs?  This one is small ~1 inch x 1-1/4 inch.

 

 

FREE WHEN YOU JOIN MY YAHOO! GROUPS NEWSLETTER

Click here to join MurphysDesignsNews

 

~~~~~~~~~~~~~~~~~~~

If you would like to learn how to stitch out my tatting designs,

click here to find out more on how to get your copy of my Tatting DVD.

_____________________________________________

Click the mailbox to send me an email message.

 

Copyright 2000- 2012  Marian Ecker

 

All site pages, pictures and designs copyright Murphy's Designs - "Murphy" Marian Ecker - all rights reserved

Embroidery Library pictures used with permission.