Tatting 88 - Free-Standing Tatted Edged Round Designs by Murphy's Designs

SALE FOR A LIMITED TIME*

Machine embroidery tatting-edged rounds done in the hoop! Complete instructions included.

For 4x4 inch hoops and larger.

All designs are delivered as email attachment in Zip file.

Click for a larger view. Picture of my stitchouts.
Free-standing tatting edged round designs done in the machine embroidery hoop! These sweet and delicate tatting edges are completely free standing when attached to fabric or paper. They are done like easy applique. I even have one that includes cross stitch. All the others include an inner circle that can be done with a wing needle for a traditional entredeux look. Or you can use a regular needle. Leave off the last color if you don't want the inner circle. These designs coordinate with the Tatting 87 designs. I include detailed instructions so you can stitch these. These tatting edged rounds are all done as in the hoop projects. No additional sewing necessary. I used a regular weight (40 wt.) embroidery thread for all designs shown in this set.
Click for a larger view.	I made a beautiful round with a tatted edge. This is all done completely in the hoop and has finished edges. You use a piece of fabric and wash away stabilizer. I include the cross-stitch design too. You can add an initial as I have done (not included). I used a regular-weight 100% linen fabric. I used a regular 40-weight embroidery thread. The tatting edge is polyester thread and the cross-stitch and initial are done with rayon thread. It looks like it should be hard - but it isn't. This one is for the 6x10 inch (150x240 or 160x260 mm) size of hoops. Complete instructions included.
Click for a larger view.	This shows a comparison of the 8-inch hanky with the new round. The hanky is from Tatting 87. Complete instructions included.
Click for a larger view.	I used a deep batik fabric for this one (5x7 inch size). I used a wing needle and a thread color that was close to the fabric color for the entredeux stitching - it makes it look more the traditional entredeux that way. You don't have to use a wing needle if you don't want to - or if your machine can not handle a wing needle. Just use the largest size of needle your machine will allow. You can see some of the white through some of the holes on the top right of the entredeux circle on the fabric. This one has a finished edge on the fabric. This is all done right in the hoop. Complete instructions included.
Click for a larger view.	I am holding one of the rounds that I stitched on sparkle organza. This one is very light and airy. I decided to not stitch the entredeux circle on this one. I used polyester thread. It looks like it should be hard but it isn't. Complete instructions included.
Click for a larger view.	This one is for the 4 inch hoops (100x100 mm). I used a thread color that is the same as the fabric for the entredeux stitch. I used a regular 40-weight embroidery thread -polyester. Complete instructions included.
Click for a larger view.	I stitched this one on Mulberry Paper. I get mine here - Make sure you get HEAVY weight Mulberry paper. They have LOTS of different paper. I used a turquoise paper for one of the rounds but the paper color ran onto the thread. Not a problem with this white paper though. I used a wing needle for the entredeux circle in the middle. I used a contrasting thread so it really shows up. This is the larger size - 6x10 inch (150x240 mm) hoop size. This design does not have a finished edge - great for paper or a fabric that already has a finished edge. The tatting edge's picots catch right along the edge. Complete instructions included.
Click for a larger view.	This one is on Mulberry paper - for the 5x7 inch (130x180 mm) hoops. I didn't use a wing needle for the entredeux circle and I used the same thread color that I used for the edge. You can leave off the last color if you don't want the entredeux circle. Complete instructions included.

*On sale for a limited time. Sale pricing until February 5, 2012

BEST DEAL-GET THEM ALL

COMBO 1 - 13 DESIGNS FOR 6x10 INCH (160x260 MM) HOOPS

GET ALL DESIGNS IN SET

++++

For 6x10 inch (160x260 mm) hoops (or larger)

ART, JEF, HUS , PES, DST, EXP, SHV, VIP, VP3, XXX

formats and Embird EDR - all included in zip file)

LESS THAN $1 EACH!

COMBO 1

PayPal

Regular $15.00

SALE $12.50

For 6x10 inch (160x260 mm) hoops (or larger)

(13 designs)

Sent as email attachment.

COMBO 2 - 7 DESIGNS FOR 5x7 INCH

(130x180 MM) HOOPS

++++

For 5x7 inch (130x180 mm) hoops (or larger)

ART, JEF, HUS , PES, DST, EXP, SHV, VIP, VP3, XXX

formats and Embird EDR - all included in zip file)

COMBO 2

PayPal

Regular $11.00

SALE $9.00

For 5x7 inch (130x180 mm) hoops (or larger)

(7 designs)

Sent as email attachment.

COMBO 3 - 3 DESIGNS FOR 4x4 INCH

(100x100 MM) HOOPS

For 4x4 inch (100x100 mm) hoops (or larger)

ART, JEF, HUS , PES, DST, EXP, SHV, VIP, VP3, XXX

formats and Embird EDR - all included in zip file)

COMBO 3

PayPal

Regular $9.00

SALE $7.00

For 4x4 inch (100x100 mm) hoops (or larger)

(3 designs)

Sent as email attachment.

SINGLE ROUND WITH CROSS-STITCH & TEMPLATE ONLY

TWO DESIGNS FOR 6x10 INCH HOOP

For 6x10 inch (150x240 or 160x260 mm) hoops (or larger)

ART, JEF, HUS , PES, DST, EXP, SHV, VIP, VP3, XXX

formats and Embird EDR - all included in zip file)

SINGLE ROUND WITH CROSS-STITCH

PayPal

Regular $11.50

SALE $8.50

For 6x10 inch (160x260 mm) hoops (or larger)

(2 designs)

Sent as email attachment.

CROSS-STITCH CENTER ONLY

ONE DESIGN FOR 5X7 INCH HOOP

For 5x7 inch (130x180) mm hoops (or larger)

ART, JEF, HUS , PES, DST, EXP, SHV, VIP, VP3, XXX

formats and Embird EDR - all included in zip file)

CROSS-STITCH CENTER ONLY

PayPal

Regular $7.50

SALE $6.50

For 5x7 inch (130x180 mm) hoops (or larger)

(1 design)

Sent as email attachment.

To order by check/MO (US funds) - click here.

Click here.

Here's what you get.

Free-Standing Tatting Edged Rounds

6x10 inch (150x240 or 160x260 mm) hoops

Tat88-150

149.6x149.7 mm (5.89x5.89 ")

15987 stitches

3 colors, 3 thread changes

Tat88-150FE

149.4x149.4 mm (5.88x5.88 ")

18378 stitches

3 colors, 3 thread changes

Tat88-150FETempl

130.4x130.4 mm (5.13x5.13 ")

228 stitches

1 colors, 1 thread changes

Tat88-150NETempl

129.7x129.8 mm (5.11x5.11 ")

101 stitches

1 colors, 1 thread changes

Tat88-150WXSt

149.4x149.4 mm (5.88x5.88 ")

25155 stitches

8 colors, 11 thread changes

Tat88XStOnly

110.2x110.2 mm (4.34x4.34 ")

7074 stitches

7 colors, 8 thread changes

Free-Standing Tatting Edged Rounds

5x7 inch (130x180 mm) hoops

Tat88-130

129.6x129.6 mm (5.10x5.10 ")

12439 stitches

3 colors, 3 thread changes

Tat88-130FE

129.6x129.6 mm (5.10x5.10 ")

15210 stitches

3 colors, 3 thread changes

Tat88-130FETempl

107.5x107.4 mm (4.23x4.23 ")

190 stitches

1 colors, 1 thread changes

Tat88-130NETempl

109.5x109.4 mm (4.31x4.31 ")

87 stitches

1 colors, 1 thread changes

Free-Standing Tatting Edged Rounds

100x100 mm hoops

Tat88-100

95.6x95.6 mm (3.76x3.76 ")

8751 stitches

3 colors, 3 thread changes

Tat88-100FE

95.6x95.6 mm (3.76x3.76 ")

10168 stitches

3 colors, 3 thread changes

Tat88-100Templ

73.6x73.6 mm (2.90x2.90 ")

62 stitches

1 colors, 1 thread changes

Tatting inspired from online public domain patterns.

Web page created January 8, 2012

Want to try a small sample of my tatting designs? This one is small ~1 inch x 1-1/4 inch.

FREE WHEN YOU JOIN MY YAHOO! GROUPS NEWSLETTER

~~~~~~~~~~~~~~~~~~~

If you would like to learn how to stitch out my tatting designs,

click here to find out more on how to get your copy of my Tatting DVD.

_____________________________________________

Click the mailbox to send me an email message.

Embroidery Library pictures used with permission.